這種拉絲方法是zui傳統的拉絲方法，用于平面拉絲，特別適合板材加工，這種拉絲方法是無意磨。研磨產品為無織布拉絲輪或砂帶。適用于圓管工件，如手柄等。這樣拉絲的線紋通常是短線紋，與工件的旋轉速度、研磨產品的旋轉速度和研磨產品本身有關。尼龍輪采用機器轉速驅動，產品采用人工技術打磨。適用于不規則電鍍產品。

This drawing method is a traditional drawing method used for flat drawing, especially suitable for sheet metal processing. This drawing method is unintentional grinding. The grinding product is a non-woven drawing wheel or sand belt. Suitable for circular pipe workpieces, such as handles. The wire drawing lines in this way are usually short lines, which are related to the rotation speed of the workpiece, the rotation speed of the ground product, and the ground product itself. The nylon wheels are driven by machine speed, and the products are polished using manual technology. Suitable for irregular electroplated products.

根據拉絲產生的紋理效果，主要有直紋、亂紋、螺紋、波紋、旋紋等。

According to the texture effects produced by wire drawing, there are mainly straight lines, irregular lines, threads, ripples, spiral lines, etc.

直線拉絲是指通過機械摩擦在鋁板等表面加工直線。它具有去除鋁板表面劃痕和裝飾鋁板表面的雙重作用。包括連續線和間歇線。連續線可通過連續水平直線摩擦鋁板等表面獲得。改變不銹鋼刷的鋼絲直徑，可以獲得不同厚度的線條。間歇線通常在拋光機或拋光機上加工。

Linear drawing refers to the machining of straight lines on surfaces such as aluminum plates through mechanical friction. It has a dual function of removing scratches on the surface of aluminum panels and decorating the surface of aluminum panels. Including continuous lines and intermittent lines. Continuous lines can be obtained by continuously horizontal straight lines rubbing against surfaces such as aluminum plates. By changing the wire diameter of the stainless steel brush, different thicknesses of lines can be obtained. Intermittent lines are usually processed on polishing machines or polishing machines.

在高速運行的銅絲刷下，鋁板前后左右移動摩擦獲得的無規則、無明顯線條的啞光絲。該加工對鋁或鋁合金板的表面要求較高。

Under the high-speed copper wire brush, the aluminum plate moves back, forth, left, and right to obtain an irregular and indistinct matte wire through friction. This processing requires high surface requirements for aluminum or aluminum alloy plates.

一般來說，它是在拋光機或拋光機上制造的。利用上組磨輥的軸向運動，在鋁或鋁合金板表面線，也稱為旋轉光，是一種用圓柱氈或研石尼龍輪安裝在鉆床上，用煤油混合拋光軟膏，旋轉拋光鋁或鋁合金板表面獲得的絲線。主要用于圓形標志和小型裝飾表盤的裝飾加工。

Generally speaking, it is manufactured on a polishing machine or polishing machine. Using the axial movement of the upper group of grinding rollers, a thread, also known as rotary polishing, is obtained on the surface of aluminum or aluminum alloy plates by installing a cylindrical felt or grinding stone nylon wheel on a drilling machine, mixing kerosene with polishing paste, and rotating to polish the surface of aluminum or aluminum alloy plates. Mainly used for decorative processing of circular logos and small decorative dials.

用軸上有圓氈的小電機將其固定在桌面上，與桌面邊緣成60度左右的角度。另外，用固定鋁板壓茶的拖板，在拖板上貼一層邊緣齊直的聚酯薄膜，限制螺紋的競爭力。利用毛氈的旋轉和拖板的直線移動，在鋁板表面擦拭相同寬度的螺紋。

Fix it on the desktop with a small motor with a circular felt on the shaft, at an angle of about 60 degrees from the edge of the desktop. In addition, use a fixed aluminum plate to press tea on the drag plate, and apply a layer of polyester film with straight edges on the drag plate to limit the competitiveness of the threads. Using the rotation of the felt and the linear movement of the drag plate, wipe the same width of threads on the surface of the aluminum plate.